Project documents
- Construction phase plan (CPP)
- RAMS
- Site induction
- Health and safety policy
- Emergency and rescue plans
- Lifting plan (LOLER)
- First aid needs assessment
RAMS, CPP and CDM documents, written for your site
Our consultant writes your health and safety documents for your trade, your site and your risks. A RAMS within 12 hours, a complete CDM pack within 5 working days.
Ready when you need them
RAMS12hours
A full, site-specific RAMS within 12 hours of receiving complete information about the job.
CDM pack5working days
A complete CDM pack within 5 working days, written for your site and built on its risk assessment.
More than 100 templates, written up for your site
We start from our own tested templates and write each document for your job. These are the documents we write most often.
Risk assessments
- COSHH, including silica dust and isocyanates
- Noise and hand-arm vibration (HAVS)
- Manual handling (TILE)
- DSEAR
- Young persons and individual risk assessments
- Heat and cold stress
- Environmental impact
Permits to work
- General permit to work
- Permit to dig
- Hot works
- Confined spaces
- Live electrical work
- High-risk work at height
- Critical lifts
- Work near gas
- Street works (NRSWA)
- Out-of-hours work
Inspection records
- Scaffolds (7-day)
- Excavations
- Edge protection
- Mobile towers (PASMA)
- Ladders and podium steps
- Work equipment (PUWER)
- Vehicles and plant
- Temporary lighting
- Hoarding and site perimeter
Registers
- Plant
- Temporary works
- RPE face-fit
- Holes, covers and voids
- Exclusion zones
- Lone working
- Spill kits
- PPE
Monitoring
- Dust
- Noise
- Vibration
- Gas and atmosphere
- Weather
Electrical
- PAT register
- Monthly RCD tests
- Isolation certificates
- Lock-out / tag-out records
- GS38 test equipment checks
Appointments and incidents
- Banksman, plant operator and manual handling trainer appointments
- Accident and near-miss reports
- Emergency contacts
Toolbox talks
Almost 40 topics, including working at height, scaffolds, excavations, silica dust, manual handling, asbestos awareness, hot works and mental health.
How it works
- Call us or leave your number. The first call is free, and you usually get a rough price on the same call.
- Send us your company details, the site address, the scope of work and the tools or equipment you will use.
- Get your documents: a RAMS within 12 hours, a complete CDM pack within 5 working days.
Why our documents
Written for your site
We start from our own tested templates and write every document for your trade, your site and your risks.
Built on a risk assessment
Every CDM pack starts with a risk assessment. The risks that matter most on your site decide which documents go into it.
Around 150 CDM projects a year
Including difficult and unusual jobs.
FAQ
How fast can I get a RAMS?
Within 12 hours of receiving complete information about the job. At night or at the weekend, call the H&S Emergency Line: 07860 278 115.
How long does a CDM pack take?
Up to 5 working days from receiving complete information. What goes into the pack depends on the risk assessment for your site.
What do you need from me to write a RAMS?
We need your company details, the site address, the scope of work and the tools or equipment you will use.
Is the first call free?
Yes. On the first call we work out what has happened and what you need. You usually get a rough price on the same call.
Related services
One-off project
The full CDM pack, a site visit, induction training and getting ready for an HSE inspection, for one job.
Annual subscription
All your projects for a year: documents, site inspections and audits, accident investigation, asbestos and 24/7 online advice.
H&S Emergency Line
Accident, HSE inspection or a difficult situation on site: call at any hour. Remote help straight away, a full RAMS within 12 hours.
Tell us what you need. We'll call you back.
